Product Introduction Non-contact AC voltage detector (electroscope) VD-16 This model can know whether there is electricity by touching the wire sheath?!? It can also test whether the live wire and the ground wire are connected incorrectly. It can be used for audio power or precision instrument power detection. Applicable: Check whether there is any household or industrial power. Leakage of electricity, check whether the socket has electricity, check and repair the control panel...etc.

Measurement Specification

Operating Temperature : 0 ~ 40°C

Humidity : Less than 85%RH

Sensing Voltage : 1,000 Volts (V)

Sensing Frequency : 50 - 400 Hertz (Hz)

Battery : 1.5V AAA Battery ×2 Voltage

Detecting Range : 5V ac - 1000V ac Frequency Range : 50Hz/400Hz

Safety Category : CAT IV 1000V

Size : 154×32×28 mm Weight : about 50 g (including battery)

Detection Range : 5V AC - 1000V AC

Frequency Range : 50Hz/400Hz Safety Category : CAT IV 1000V

Power Source : 1.5V button cell, AAA or equivalent battery, 2 pieces

Dimensions : 154×32 Sensor Type : Non-contact Measurement Type :

AC Voltage Range : 50V to 1000V AC Accuracy : ±1.5%

Product Features

Flashlight Function : yes

Non-contact AC Voltage Detection : yes

Illumination Function : yes

Non-contact Detection : yes

Adjustable Sensitivity : yes

Lighting Function : yes

Safety Rating : CAT IV 1000V

Alarm Mode : Audio and Visual Alert Battery Life : Approx. 150 hours

Auto Shut-off : Yes

Product Information

Dimensions : 154 × 32 × 28 mm

Weight : Approx. 50 g including battery

Accessories : Batteries

Power Supply : 1.5V button cell, AAA or equivalent, 2 pieces Size : 154×32×28 mm

Weight : about 50 g (including battery)

Operating Environment :

Temperature 0 ~ 50°C,

Humidity below 70%RH without condensation

Size : 154×32 Power Source : 1.5V button cell, AAA or equivalent battery, 2 pieces

Weight : Approx. 100g Length : 150 mm

Accessories : User Manual, Battery AA×2