Accurate DC/AC digital clamp meter for current measurement.

10mA high resolution on 40A DC/AC range.

One touch zero for DCA adjustment.

23 mm diameter jaw.

Large 3 3/4 digits LCD

Fast bargraph display (20 times/sec.) for transient observation.

Continuity and frequency measurements.

Max/Min and Data Hold functions.

600V overload protection for ohm measurement.

Easy single rotary switch for any function selection.

Ideal for works in crowded switch box or cable areas.

Specifications

(23 +/- 5 deg C) DCA 0-40A 10mA +/- 1.0% +/- 2dgts

DCA 0-150A 100mA +/- 1.0% +/-2 dgts

DCA 150-200A 100mA -2.2% +/- 2dgts ACA 0-40A 10mA +/- 1.0% +/- 3 dgts ACA 0-150A 100mA +/- 1.0% +/- 3 dgts

ACA 150-200A 100mA -2.2% +/- 3dgts

DCV 0-400V 0.1 V +/- 1.0% +/- 2dgts

ACV 0-400V 0.1 V +/- 1.0% +/- 2 dgts 0

Ohm-400 Ohm 0.1 Ohm +/- 1.0% +/-2dgts beep if < 40 Ohm (Approx.) Hz 0-1000KHz 0.1-100 +/- 0.5% +/- 2dgts 1V

sensitivity

Auto Range

General Specification

General Specification Conductor Size: 23mm max. (approx.)

Battery Type: two 1.5V SUM-3

Display: 3 3/4 LCD with 40 seg. bargraph

Range Selection: manual

Overload Indication: left most digit blinks Power Consumption: 10 mA (approx.)

Low battery Indication: Sampling Time: 2 times/sec. (display) 20 times/sec. (bargraph)

Operating Temperature: -10 deg C to 50 deg C

Operating Humidity: less than 85% relative

Altitude : up to 2000M Storage Temperature: -20 to 60 deg C. Storage Humidity: less than 75% relative

Dimension: 183mm (L) x 63.6mm (W) x 35.6mm (H) 7.2"" (L) x 2.5"" (W) x 1.4"" (H) Weight: 190g (battery included)

Accessories: Carrying bag x 1 Users manual x 1 1.5V battery x 2