Coating Thickness Gauge/ Car paint thickness meter TG-900 For Ferrous material thickness testing TG-902 For Ferrous/non ferrous material thickness testing Features:
Coating Thickness Gauge Model: TG-900 Specifications: TG-900 Range 0 to 40.0 mils ( 0 to 1000 micro m) Resolution 0.1 mils/ 1 micro m Response time 1 second Accuracy +/- 4 digits on 0 to 7.8 mils +/-7 digits on 0 to 199 micro m. +/-(3% + 4 digits) on 7.9 mils to 40mils(200 micro m to 1000 micro m) specified at 23 C +/- 5 C , <75% relative humidity. General Display 3 1/2 digit liquid crystal display (LCD) with a maximum reading of 1999. Low battery indication the " Battery " symbol is displayed when the battery voltage drops below the operating level. Operating environment 0 to 50 C (32F ~ 122F) ambient at < 75% relative humidity. Store temperature 0 to 60 C (32 F ~ 140 F) ambient , 0to 80% R.H. with battery revoved from meter. Auto power off 10 seconds Dimensions 148 mm(H) x 105mm(W) x 42 mm(D) Accessory Soft carrying bag, Standard thickness plate 3.9 mils (100 micron), 9V battery Specifications: TG-902 Range 0 to 40.0 mils ( 0 to 1000 micro m) Resolution 0.1 mils/ 1 micro m Response time 1 second Accuracy +/- 4 digits on 0 to 7.8 mils +/- 10 digits on 0 to 199 micro m. +/-(3% + 4 digits) on 7.9 mils to 40mils +/-(3% + 10 digits) on 200 micro m to 1000 micro m specified at 23 ℃ +/- 5 ℃ , <75% relative humidity. General Display 3 1/2 digit liquid crystal display (LCD) with a maximum reading of 1999. Low battery indication the " Battery " symbol is displayed when the battery voltage drops below the operating level. Operating environment 0 to 50 ℃ (32 ℉ ~ 122 ℉) ambient at < 75% relative humidity. Store temperature 0 to 60 ℃ (32 ℉ ~ 140 ℉) ambient , 0to 80% R.H. with battery revoved from meter. Auto power off 10 seconds Dimensions 148 mm(H) x 105mm(W) x 42 mm(D) Accessory Soft carrying bag, Standard thickness plate 3.9 mils (100 micron), 9V battery Coating thickness gauge Video Coating Thickness gauge usage instructions: 1. switched, do not touch any of the objects measured until finished buckle trigger the screen appears so far. 2 zero, the need to close the first TG-902, iron or aluminum can only choose one, operating close to the sensor is required on sheet metal , then press ZERO. 3 iron and aluminum were to be zero, It is not equal to zero with iron sheet and aluminum to zero. Ordering Information: TG-900 For ferrous material TG-902 For ferrous /non ferrous material |