Product ID: PM-730  (Replaced by PM-731 as below)
Dual Input Differential Manometer
PM-730 Features:

Most Robut Diffential Pressure Meter.

4 switchable nunits: inWC, mmWC, mbar, PSI

Rubber-boot protection for tough applications.

Dual Display and Dual Input.

Main display: P1, P2

Second Display P1 -P2


Specifications:
PM-730
Accuracy 0 to 50 ℃ (32 ℉ ~ 122 ℉) +/- 1.5%FS
Operating Environment 0 to 50 ℃ (32 ℉ ~ 122 ℉) ambient
Compatible Media Dry, non-corrosive gases
Battery Power 9V
Battery Life 200 hours with low battery indication on display
Units of Measurements inWC, mmWC, mbar, PSI
Pressure ports tube connectors for 8mm, I.D. flexible tubing
Deimensions 180 mm(H) x 60 mm(W) x 30mm(D)
Weight approx. 195 g including battery.
Measurement range in WC: 0.00 to +/-60.0
mmWC: 0.0 to +/-1500
mBar: 0.00 to +/-150.0
PSI: 0.000 +/- 2.000
Accuracy +/- 1.5% FS
Can this meter be used for butane gas?
The sensor used in our differential manometer is for air pressure use.
It should not apply the gases that have corrosive property.
The butane gas is flammable and liquid type. Which I think that might influence the
sensor

Remarks:  This Manometer PM-730 shall be phased out and replaced by
PM-731 with the same specification but new style.





Product ID: PM-731

Dual Input Differential Manometer  PM-731

FETURES:

Most robust differential pressure meter.

4 switchable units: InWC, mmWC, mbar, psi.

Rubber-boot protection for tough applications.

Dual Display and Dual input.

Main Display: P1.

Second Display: P1-P2, P2.




Specifications:

DUAL INPUT DIFFERENTIAL MANOMETER

MODEL: PM-731



SPECIFICATIONS

Accuracy: Stated accuracy at 23°C±5°C,

Operating environment: 0°C to 50°C, (32°F to 122°F)

ambient.

Compatible Media: Dry, non-corrosive gases.

Battery Life: 200 hours with low battery indication on

display.

Units of Measure: InWC, mmWC, mbar, psi.

Pressure Ports: tube connectors for 8mm I.D. flexible

tubing.

Battery: 1.5V x 4pcs AAA size.

Dimensions: 171mm(H) x 83mm(W) x 40mm(D).

Weight: approx. 230g including batteries.

Measurement range:

InWC: 0.00 to ± 60.00

mmWC: 0.0 to ± 1500.0

mbar: 0.00 to ± 150.00

psi: 0.0000 to ± 2.0000

Accuracy: ±1.5% FS

Can this meter be used for butane gas?
The sensor used in our differential manometer is for air pressure use.
It should not apply the gases that have corrosive property.
The butane gas is flammable and liquid type. Which I think that might influence the
sensor


Certificate:  CE


Ordering Information:
Dual Input Differential Manometer

PM-731



Minimum Order: Negotiable
TEL: 886-2-27375866
FAX: 886-2-27373343

http://www.tecpel.com/
http://www.temperature-meters.com
TECPEL CO., LTD.