Coating Thickness Gauge

Model: TG-900 Features:
  •  Automatically hold reading,
when sensor leaves the surface.
  • Automatically measure thickness,
when you place sensor onto the surface.
  • 2-point calibration.
  • One hand operaiton- Simple and easy to be used.
  • Back light display
  • micro mini/mils user-selective.
  • Autopower off.  
  • CE-approval









Dual Input Differential Manometer
Model:  PM-730
  • Most Robut Diffential Pressure Meter.
  • 4 switchable nunits: inWC, mmWC, mbar, PSI
  • Rubber-boot protection for tough applications.
  • Dual Display and Dual Input.
  • Main display: P1, P2
  • Second Display P1 -P2
TECPEL CO., LTD.
Product ID: SM-850   
Micro Processor Base Salinity Meter ( SM-850)
Model SM-850 Features:
_Portability and simplicity one-hand operation
_Dual display Salinity and Temperature
_Automatic Temperature Compensation
_Average calculation, interval measuring,
gram-conversion
_Use highly accurate NTC temperature sensor
_Auto power off function
_CE-Mark approval
Product ID: PH-870    Micro Processor Base
pH/mV/Temperature meter
Model: PH-870 ( PH-870)

Features:
  • Hand-Held lightweight design
  • Dual display pH(mV) & Temperature
  • pH (pH4, pH7, pH10) and Temp.(25 C and 70 C)
  • calibration for highly accuracy
  • HOLD, MAX, MIN, MAX-MIN, AVG functions
  • Temperature compensation:
  • Auto(0 C to 80C)/manual(0 C to 100 C)
user selectable
  • RS232 Interface with Windows Software
Product ID: DTM-800   
Digital Thermometers ( DTM-800)
DTM-800 Features:
_CE-Mark approval
_Hand-Held lightweight design
_With pocket hook
_Highly accurate thermometer
_With MAX/DATA HOLD function
_Auto-power off function
_With °C and °F function
Product ID: UVA-830   
UVA Light Meter ( UVA-830)
UVA-830 Features:
_CE-Mark approval
_Portability and simplicity one-hand operation
_Three Ranges: 199.9 microW /cm2
1.999 mW /cm2
19.99 mW /cm2
_With MAX/DATA HOLD function
_With pocket hook
_Ultra-violet irradiance measurement for UVA
_UV detector spectrum from 320nm to 400nm

Product ID: DIM-572
Digital Insulation and Insulation Continuity-
Voltage Tester

FEATURES:

  • Originally designed unique products have
features ranging from insulation resistance testing.
  • Voltage (AC - DC) measurement with automatic  
hold facility, continuity test with a short circuit
current of minimum 200 mA.
  • For Insulation Testing, the user can select the
test voltage of 250V, 500V AND 1000VDC.
It is utilized to accept a selection and to disable the
Energy Save feature.
  • The Ohm Key is a multi-purpose key,  you press it to select the Continuity Test,
then you use it to Auto-null the test leads and fuse.
  • There is an automatic voltmeter   which is accessed after start up.
  • The Voltmeter is the default mode of this instrument.