Clamp Meters
TECPEL CO., LTD.
Product Guide
AC/DC  1000A     CA-1000D
AC/DC 600A  CA600

AC/DC  1000A     CA-1000D

  • Coverts any DMM to a current clamp
  • Measure current without disconnecting
circuit under test
  • AC/DC 600A capability
  • Dual Hall-effect sensors
  • Accuracy DC:±2%+2A AC: ±3%+2A (50~400Hz)
  • For use with any multi-meter at 200mV or 2V
ranges for direct readout.
  •  This miniature clamp meter features two
Hall effect sensors
  • For use with any multimeter with 200mV
or/and 2V ranges for direct readout input impedance
of least 1M ohm.
  • High conversion factor for low DC
and AC mA measurement.
  • With the small jaw size it can fit into tight space
in circuit panel or wire bundle to take the reading
  • The high frequency response at 20 kHz is useful
for waveform monitoring on an oscilloscope.
  • 1000A AC or DC Current Clamp
  • Measure current without disconnecting
circuit under test
  • Measure to 1000A DC or AC
  • Outputs 1mV per Amp,
operates on 2V range of any DMM
CA1000D 1000A AC/DC Current Transducer
TECPEL CO., LTD.
Tel: 886-2-2737-5866
Fax: 886-2-2737-3343
E-mail: sales@tecpel.com
E-mail: tecpel@seed.net.tw
http://www.oka.com.tw ; http://www.tecpel.com
http://www.clamp-meters.com