Tecpel

Product ID: CA-600  

AC/DC Current Transducer

Specifications:


DC/AC Current Clamp Adapter
Model CA-600
Features :
  • Coverts any DMM to a current clamp
  • Measure current without disconnecting
circuit under test
  • AC/DC 600A capability
  • Dual Hall-effect sensors
  • Accuracy DC:±2%+2A AC:
  • ±3%+2A (50~400Hz)
  • For use with any multi-meter at 200mV
  • or 2V ranges for direct readout.
  • Input impedance at least 1MΩ
  • Power on indicating
  • Zero adjustment knob to compensate the
hysteresis effect in  DC Measurements.
  • Transformer ratio:1000:1
  • Output 1mV/A
  • Jaw opening capability:30mm conductor
  • Confirm to Safety:IEC 1010-1, IEC 1010-2-032,UL,CE approved.
  • Low battery indication Model : CA 600



This Tecpel AC/DC current clamp in an accessory which will allow your
multimeter to measure electrical current up to 600Amperes DC/AC, with a
frequency response up to 400MHz. When measuring current with this clamp,
There is no need to break a circuit or to affect the isolation.






CA600
Specifications :
Measurement range:
600A DC or AC

Accuracy:   ±(2% reading +2A)

Frequency Response (AC):  50Hz to 400Hz

Input Resistance:  10kHz typical

Maximum Conductor Size:  1.1" (30mm)

General:


Power Requirement:
9V battery

Dimensions
7x2.75x1.3(178x70x33mm)

Weight:
11 oz. (290g)

Accessories:
Battery, owners man


Approval: CE mark

_______________________________________________

TECPEL CO., LTD.
Tel: 886-2-2737-5866
Fax: 886-2-2737-3343
E-mail:
sales@tecpel.com;  tecpel@seed.net.tw
http://www.tecpel.net ; http://www.tecpel.com
TECPEL CO., LTD.
AC/DC Current transducer CA-600
CA-06 current transmitter bnc connector